Memory Interfaces(DDR4, DDR5, LPDDR4x)Layout Design Guidelines With Practicals
- Course Duration: 8 Hours
- 4.6 Star (Rating)
- 300+ (Student Enrolled till Now)
Memory Interfaces (DDR4, DDR5, LPDDR4x) Layout Design Guidelines is 4 hours of theory and 4 hours of labs course with detailed emphasis on Signal Integrity for Memory Interfaces (DDR4, DDR5, LPDDR4x)Layout Design Guidelines for complex Simulations and Analysis. Signal Integrity course is targeted for PCB, Package, & Hardware design engineers to gain expertise in Signal Integrity for Memory interfaces for accurate and proper functioning of electronic devices and systems. This must do course for every electronics and electrical graduate, working professionals. Student may also opt for course on advanced Signal & Power Integrity Training.
Every aspect of course is supported with multiple examples to enable easier & quicker understanding. Course also covers multiple design consideration at simulation examples and testbench setup for the same, and all these executed from scratch. Lab sessions are planned at regular intervals to enable student work on these projects from scratch with trainer guidance. Below is quick overview of what is covered as part of Memory Interfaces (DDR4, DDR5, LPDDR4x)Layout Design Guidelines with Practical.
In this course you learn
- Signal integrity concepts and design considerations for DDR4, DDR5, LPDDR4/4X Memory interfaces.
- To examine and identify ways to prevent common signal integrity problems during PCB/Package Designing for DDR4, DDR5, LPDDR4/4X Memory interfaces.
- Memory Interface Validation & Measurement Techniques
- Signal Integrity for DDR4, DDR5, LPDDR4/4X Memory interfaces workshops using industry standard tools.
Course Curriculum:
- Introduction DDR4 and different DDR SDRAM types
- Stack up design for Memory interfaces.
- Key Challenges in PCB Design routing for memory interfaces.
- CB Design rules for DDR4 Memories
- DDR4 Bus topologies – On board and DIMMs
- Impedance, Length, and Spacing Guidelines for Data & Strobe Signals
- Impedance, Length, and Spacing Guidelines for Clock, Address Signals
- Data bus and clock terminations
- Differential pairs and Differential impedance
- Reflections and Crosstalk effects on DDR4 Timing
- Signal integrity and crosstalk simulation and analysis in pre and post layout stage with example.
- Power aware signal integrity simulation for DDR4 with example
- DDR4 Timing analysis in pre and post layout stage with both on-board chips and DIMM examples.
- Introduction DDR5 and different DDR SDRAM types
- Stack up design for Memory interfaces.
- Key Challenges in PCB Design routing for DDR5 interfaces.
- PCB Design rules for DDR5 Memories
- DDR5 Bus topologies – On board and DIMMs
- Impedance, Length, and Spacing Guidelines for Data & Strobe Signals
- Impedance, Length, and Spacing Guidelines for Clock, Address Signals
- Data bus and clock terminations
- Differential pairs and Differential impedance
- Reflections and Crosstalk effects on DDR5 Timing
- DDR5 Timing analysis.
- Signal integrity and crosstalk simulation and analysis in pre and post layout stage with example.
- Access to the Instructor – Ask questions to the instructor who taught the course
- Available 24/7 – RaceEL Academy eLearning courses are available when and where you need them.
- Learn at Your Pace – RaceEL Academy eLearning courses are self-paced, so you can proceed when you’re ready.
- Dedicated Trainer Accessible On Phone / Email / Whatsapp
- Trainer Exp: 15+ Years
Course Highlights
- Mentor Support for doubt clarifications
- Product company focused questions
- 8+ hours of lectures
- Industrial Standard tools are used
Testimonials
We had 6 days of technical training from RaceEL on SI/PI/EMC topics. Overall, this training helped us in building concepts and applying the same in our Hardware design. The method of teaching was very simple and even complicated concepts explained in easy manner. We all appreciate your training and looking forward to having advanced training on the same topic.
Surendra
Simulation Engineer
KNORR-BREMSE TECHNOLOGY CENTER INDIA PRIVATE LIMITED
Trainer’s Teaching:
- In-depth coverage of relevant Signal Integrity (SI) issues.
- Clear explanations and industry-relevant examples.
- Effective hands-on training.
- Patient and thorough in addressing questions.
- Precise coverage of SI topics with strong simulation knowledge.
- Practical industry experience in SI, chip-level packaging, and board designs beyond 10G.
- Deep understanding of SI concepts and simulation tools, with the ability to explain even the smallest technical details.
The relevance, quality, and coverage of the topics exceeded expectations. Sessions were clear and understandable, with well-structured exercises and assignments. The trainer summarized key points effectively, aiding retention, and encouraged active participation from the trainees. The overall module rating is very good.
C-DOT Engineering Team
The session was very informative, impressive and professional. We found the course most helpful for us beginners to pitch-in. Thank you for your sincere explanation with all the finer & basic details. All our team members were impressed by your knowledge and the way you carried out the session. As we are beginner to this profile, we expect your continued support on this.
Sandhya IM
Technical Architect
Quest-Global
We would like to extend our sincere gratitude for the exceptional Signal Integrity (SI), PCB, and Hardware training your team conducted. The sessions were insightful and expertly delivered, covering both fundamental and advanced topics with a great balance between theory and practical application.
The trainers demonstrated in-depth knowledge and a remarkable ability to simplify complex concepts, making them easily understandable. We especially appreciated the hands-on exercises and real-world case studies, which provided us with practical tools and techniques to apply directly in our projects.
Shameer
Senior Managerr
Actalent Engineering Services
I have taken Altium training. The training provided by the “RaceEL Technologies” was very informative. It had hands-on on the software and study materials for reference. The person taking the training was an expert with good working knowledge. He was able to respond to some of the practical queries and how to handle them in the software. The training was customised based on our need if requested so, it was very helpful.
Avinash Premji Nair
Senior Firmware Engineer
AMETEK india
Thank you for the excellent Hardware Design and PCB Training for our freshers. The training was well-structured and accessible, providing a strong foundation in essential concepts. The hands-on activities and real-world examples were especially helpful in making complex topics easier to understand.
We appreciate the quality of training and look forward to more sessions with RaceEL Academy.
Hardware team
Thales India.
The Signal Integrity (SI) and Power Integrity (PI) courses provided a comprehensive foundation in high-speed design principles, covering essential topics like crosstalk, impedance matching, voltage ripple, and PDN design with a good balance between theory and practical application. Real-world examples and diagrams made complex concepts accessible, though both courses could benefit from more hands-on practice with simulation tools, detailed case studies, and additional resources for further learning.
Venkat was knowledgeable and approachable, effectively connecting theoretical material to real-world applications, especially in troubleshooting common SI and PI issues. Overall, these courses delivered valuable insights for professionals in PCB design and high-speed electronics, with opportunities for enhancement through extended sessions, interactive lab exercises, and deeper exploration of advanced topics like multi-layer PCB impacts on power integrity and high-density designs for modern applications..
Mohammed Tabesh
Senior Manager
Western Digital